LeapZipBlog: 3635OBD2's blog: SKP1000 says should update it with usb cable (Solved)

SKP1000 says should update it with usb cable (Solved)

November 15, 2017 by 3635OBD2  

Problem:

Please i bought SKP1000 one week ago

When i power on it say i should update it with usb cable

skp1000 function error 4

 

 

Solution supplied by www.obd2eshop.com engineer:

The sd card file is damaged, please do:

1.format sd card;

  1. Download the attached file, decompressed it and paste it into the sd card.
  2. Turn on SKP1000 machine and enter Update menu to update the System.

 

Download the attached file:

 

SKP1000 system update procedure:

Before update firmware, please take out the TF card and insert it into the card reader, then plug into the computer USB port. Double click “My Computer”, find out ” local Disk (H:), right click to choose “Format”.

 

Tip: Tick on the “Quick format” and click “Start.

After complete format, go to the official site to download the update file, then copy and paste the file into the TF card, after finish, plug the TF card into the machine, power on the machine to the main interface.

Click on “Firmware update” to update the system or the Adaptor.

 

 

Firstly choose “System firmware”, press [Yes], the procedure shown as below:

skp1000 update-02

 

skp1000 update-03

 

Update Firmware succeed shown as below, Press [NO] to back.

 

 

Source: