July 22, 2019 by Angel Carter
Whenever users have to install spectrum internet they either take help of professional assistance or they seek help from existing user of spectrum internet. Well now no longer to seek help from professional assistance to install Spectrum services, because you can take help of self-installation technique! To install Spectrum’s Internet, Wi-Fi, and Voice services on your own, basically follows these step-by-step instructions: Well these steps surely help you to install your spectrum internet services by your own or either as usual you can contact +1-844-947-4746 Spectrum Customer Support.
STEP 1: 1ST Step will be connecting the Coaxial Cable, Plug up one end of the coaxial cable hooked on the wall power outlet and then attach the other end to the Wi-Fi modem.
If your Spectrum receiver is steadily connected to the wall outlet, after that, check the instruction below. It is not consent to use all cables during the fixing process.
Start with; unplugging the coaxial cable of the Spectrum receiver from the cable wall outlet. Get the diminutive coaxial cable and plug one end to the wall outlet, and then connect the cable’s other end to the surface of the splitter which has the single connection (IN).
Attach one end of the coax cable of the Spectrum receiver to an OUT connector on the splitter. Make sure that the other closing stages are properly connected to the Spectrum receiver.
Now, connect an end of the long coaxial cable to the second OUT connector on the splitter and then connect the other end of the coax cable to the modem.
Additional, continue the procedure with step 2.
STEP 2: Now, Connect the Power Cord
Plug up the closing stages of the power cord into your Spectrum modem and the other end into a power outlet.
Once you have plugged in the power cord, wait for the modem to connect to the spectrum network. It would take about 2 to 5 minutes. Then proceed to the next step.
STEP 3: Connect the Modem to Phone
Get the phone cord and plug one end to your phone and connect the other end to ‘Port 1’ on Spectrum modem.
Subsequent to plug in the modem, wait for the modem to connect to the network. It would take about 2 to 5 minutes. Then carry on to the next step.
STEP 4: Now, Connect the Modem to the Wi-Fi Router
Acquire the Ethernet cable and plug one end to your Spectrum modem. Then connect the other end to the Wi-Fi router through the yellow Internet port.
STEP 5: At this instant, Plug in the Wi-Fi Router
Same way of connecting, Plug one end of the power cord into the Spectrum’s Wi-Fi router, and plug the other end into a power outlet.
Wait for the Wi-Fi light on the router’s front panel turns on. Suppose, no light turns on; then do press the Power button (ON/OFF) on the stern panel of the Spectrum’s Wi-Fi router.
STEP 6: Now 6th step will be connecting a Wireless Device to your Wi-Fi Router
First, make sure that your Wi-Fi is on and then open the list of Wi-Fi connections on your wireless device.
Choose the SSID which is in print on your Wi-Fi router. If the name is ending in ‘5G’, this imply that your device is competent of 5 GHz. Therefore, connecting to the ‘5G’ network would endow with a better occurrence.
Following that, penetrate the password which is printed on your Wi-Fi router.
Reminder: Follow these steps to connect other devices to the Wi-Fi router.
STEP 7: Now time to activate the Modem
For activating service, visit net/self-install on your personal computer or mobile device.
Gently restart your Wi-Fi router almost immediately after the activation procedure is completes.
Self-installation of these services is very easy if you cautiously follow these steps. But any how if you miss, skip or not able to follow the steps carefully or not able to set up Spectrum Internet and Voice Services on Your Own, in that case you can call our customer support at Spectrum Customer Service Phone Number +1-844-947-4746. Resources URL: - https://medium.com/@angelcarter240191/know-the-steps-for-installing-spectrum-internet-and-voice-services-on-your-own-fa829564d58c