LeapZipBlog: chenjia's blog: Cooler performance Of Visi Cooler Manufacturer

Cooler performance Of Visi Cooler Manufacturer

July 24, 2019 by chenjia  

Visi Cooler Manufacturer wide heat transfer area: The heat transfer tube of the cooler adopts a copper tube thread type design, and the contact area is wide, so the heat transfer effect is higher than that of the general smooth heat transfer tube.
Good heat transfer: This series of copper tubes are directly sintered by copper tubes to make the heat transfer tubes integrated, so the heat transfer is good and reliable, and there is no heat transfer due to the loss of solder joints.
Can be suitable for large flow: the number of heat transfer tubes is reduced, the smooth area of ​​the oil is increased, and the loss of pressure can be prevented. There is a partition to guide the flow direction, which can produce a curved flow direction, increase the flow, and exert its effectiveness.
Good heat transfer tube: It is made of 99.9% pure copper with good thermal conductivity, which is the most suitable cooling tube for heat dissipation.
No oil leakage: Because the plate tube and the body adopt an integrated design, it can avoid the trouble of mixing water and oil. At the same time, it is tightly sealed after being tested at the factory, so it can achieve the purpose of leak prevention.
Easy assembly: the foot can be rotated freely by 360 degrees. For the body to change direction and angle assembly freely, the foot can be directly welded to any position of the mother machine or oil tank, which is convenient and simple.
The spiral baffle guides the oil into a spiral continuous and continuous flow, which overcomes the heat transfer dead angle generated by the traditional baffle, has high heat exchange efficiency and small pressure loss.
The flow has two processes and four processes. The flow has a large flow (large guide of the deflector) and a small flow (small guide of the deflector), which can meet various requirements.