LeapZipBlog: obd365's blog: Read Dodge RAM Pin Code with Xtool X100 PAD

Read Dodge RAM Pin Code with Xtool X100 PAD

August 14, 2019 by obd365  

Test:  xtool x100 pad bench programming Dodge RAM immobilizer function
Result: Success !

Disclaimer:
The test was carried out by Mexican expert. You are at your risk.

Instructions:
set up bench connection

xtool-x100-pad-dodge-ram-1

 

xtool-x100-pad-dodge-ram-2

 

xtool-x100-pad-dodge-ram-3

 

xtool-x100-pad-dodge-ram-4




connect module with VCI module and x100 pad, connect another end to key lock EIS (with key inserted) and power supply

xtool-x100-pad-dodge-ram-4

 

xtool-x100-pad-dodge-ram-5



In X100 pad, select Immobilizer->Chrysler->Immobiliser/Fobik (WCM)->Auto detect
Auto detect Type 4

xtool-x100-pad-dodge-ram-6

 

xtool-x100-pad-dodge-ram-7

 

xtool-x100-pad-dodge-ram-8




Select Read security code

xtool-x100-pad-dodge-ram-9


Read pin code success

xtool-x100-pad-dodge-ram-10


Then choose to program new key/old key and follow xtool x-100 pad prompts until success.
Done.

http://www.key-programmer.org/2019/08/14/program-dodge-ram-key-with-xtool-x100-pad-on-bench/