LeapZipBlog: xiaoxuanxuan's blog: Maintenance of ultra-fine mill parts

Maintenance of ultra-fine mill parts

October 15, 2019 by xiaoxuanxuan  

As a powerful assistant for the processing of mineral resources powder, the ultra-fine grinding machine has been damaged by various degrees for a long time. Due to various reasons such as design, materials, process and assembly, the work capacity is lost or the design of the parts is not achieved. The required working performance is mainly manifested in several aspects such as wear, deformation and fracture. The staff is indispensable for the technique of how parts are repaired and replaced. ultrafine mill mainly consists of main machine, classifier, fan, smashing, bucket elevator, electromagnetic vibrating feeder, storage bin, pulse dust collector, pipeline device, cyclone powder collector, electric control cabinet, motor And so on. In addition to these large parts, small parts such as spindles, large belts, grinding discs, grinding rings, grinding rolls, grinding, etc. are repaired and replaced frequently. Therefore, we need to understand the causes of the ultra-fine mill equipment parts. In order to prescribe the right medicine. The phenomenon of fracture is the failure of the ultra-fine mill parts under the action of external loads such as tension, compression, bending, shearing and twisting, heat, magnetism, corrosion, etc., and their continuity is destroyed, local cracking or splitting occurs. In a few parts of the phenomenon. Not only does the unit lose its ability to work completely after the part is broken, but it can also cause major economic losses or casualties. Breaking requires a process that requires careful inspection by a professional to prevent it from happening. The parts are plastically deformed, their shape and size are permanently changed, and the normal relative position or meshing relationship between the parts of the ultrafine mill is destroyed, resulting in vibration, noise, and load bearing capacity. In severe cases, mechanical parts and even machines cannot work normally. . It is necessary to distinguish the deformation of the part. The ultra-fine grinding machine has been working for many years, and it is deeply tempered by the wind and rain. It has a firm heart, but it is a steel body. The surface damage of parts is mainly caused by wear, corrosion and contact fatigue. This requires the user to do their maintenance. You can't take a small rust and ignore it. Water can also carry a boat.