LeapZipBlog: zhengtianci's blog: Precautions for fertilizer equipment in use

Precautions for fertilizer equipment in use

December 11, 2019 by zhengtianci  

When the fertilizer equipment manufacturer is operating, there are about four situations as follows:

1. Before starting the fertilizer equipment:

Since all parts of the new fertilizer equipment have not been run in yet, it is necessary to heat up the equipment for the first start-up, which generally requires 40-50 minutes. For specific operation, first raise the temperature to the point where you can pull the motor V-belt by hand until it is free, and then pull the motor continuously for 8-10 times according to the normal operation option. Then keep warming for about 10 minutes.

2. Temperature control after startup:

Before startup, we have conducted preliminary temperature adjustment for the equipment. The treatment of materials in the organic fertilizer production line is determined according to the characteristics of the materials themselves. Therefore, after startup, we need to continue to heat up, because the normal production needs to continue to supplement heat; adjust different temperatures according to different properties of plastic materials.

3. When the fertilizer equipment works normally:

During normal operation, the temperature of the machine shall be kept stable, not high or low. Near the blowhole, keep the temperature of the machine head at about 200 ℃. At this temperature, it can generally have a good processing for most materials.

4. When the fertilizer equipment is shut down:

First of all, cut off the power supply of the host machine, and remove the head plug of the equipment. Preheat separately before next use.