LeapZipBlog: Dineshindustries's blog: The advantages of stainless steel pipe fittings

The advantages of stainless steel pipe fittings

February 17, 2020 by Dineshindustries  

The exceptional rust resistance and reflex properties of stainless steel create the stainless steel pipe have the following advantages:

  1. The service life is very long (even in the case of periodic vibrations), the field corrosion test data shows that the life of the carbon steel pipe fittings can reach 100 years;
  2. Low life cycle cost, almost no maintenance of the pipe, avoiding the cost and problems of pipe replacement, low operating cost, and significant economy;
  3. Significantly reduce the rate of water leakage, so that water resources can be protected and used effectively.

Stainless steel has a smooth surface and a small resistance to friction. Water-resistance at low flow rates is only 2/5 of that of 316 Stainless Steel Flanges. Then stainless steel pipe:


  • It is clean and sanitary. It is not easy to contaminate with bacteria or accumulate dirt. It is easy to clean, less cleaning costs.

 The energy-saving, the phenomenon without resistance to the bottleneck, the low power consumption of the pump, the large-scale use of the water supply of the 304 stainless steel fittings network, can save half the energy consumption of the station pumping. The water flow of the pipe with the same caliber is greater than that of other metal pipes. Stainless steel can be 100% recycled. Therefore, the pipeline will not cause environmental pollution, green and environmental protection, which is conducive to sustainable development; Stainless steel waste also has great economic value.

  • The appearance of stainless steel is beautiful, clean, and modern, which gives users full confidence. The Stainless Steel 316 Pipe Fittings helps to improve the degree of urban buildings. The stainless steel material is safe and non-toxic, has no impact on water quality, and is harmless to human health.

The 304 Stainless Steel Flanges are easy to buy, and there are several forms of products to choose from. Administration, construction, and installation are simple and reliable, with a variety of connection methods and pipe fittings, which customers can freely select, with a reliable connection and no leaks. Pipe fittings can be made of stainless steel or copper-base alloy.

  • Mild Steel Flanges are widely used in the municipal water supply network, direct drinking water pipe, hot water transmission, medium and high-grade construction water supply, heating water pipe, steam pipe, outdoor pipe in areas of severe cold, urban fire water supply, room pump, and other occasions. Beautiful appearance can be installed outdoors, hidden, or buried.

The initial investment for selecting WPHY 42 stainless steel tubes is not high. People generally think that it is expensive to use stainless steel tubes, which is not the case.

Advantages of press-fitting accessories

Pressing accessories (press-fitting system) for Blansol multilayer pipes have these advantages:

Greater resistance to tensile stress. The bushing has a device for positioning the clamping jaw concerning the shape of the accessory, which significantly improves its resistance to tensile stress.

Double anti-corrosion chamber. Through a special rubber gasket housed in the bushing, contact between the three metals of the system (stainless steel, nickel-plated brass, and aluminum) is prevented, eliminating the possibility of water, both inside and outside the tube, may come into contact with aluminum starting its corrosion.