February 2, 2018 by 3635OBD2
Vehicle data reading
IDS language setup
How to use VCM2 IDS 108 to read vehicle info:
Run IDS Integrated Diagnostic Software
Click on the VCM 2 icon on the bottom left for diagnostic
Start New Session, then All other
Vehicle specification: 2011 MY
Check vehicle info
Engine Type: DURATECH-HE/I4
Fuel Type: Gasoline
How to use IDS 108 for Ford module programming:
Programmable Module Initialization:
ABS, ACM, AHCM, BCMII, CCMII, CDP, CMR, DSM, HCM, HVAC, IPC, IPM-A, PAM, PBM, PCM, PDM, PSCM, RCM
ABS, ACM, AHCM, BCMII, DABM. IPC, PAM, PCM, RFA, TCM, VDM
Odometer Write, Car Configuration Parameter(s)
How to do v108 Ford IDS Self Test:
All CMDTCs explanation
How to do DataLogger in IDS 108 Ford:
Body, Chassis, Electrical, Powertrain, Module
Set the ignition switch to ON
How to use Ford IDS108 for Powertrain:
How to use IDS108 software for Electrical:
How to use IDS108 software for Ford Chassis:
How to use VCM 2 IDS108 for Ford Body:
Body: Security, Service Functions, BMS Reset, Power Seats
How to use Ford IDS 108 Oscilloscope Tools:
Oscilloscope Tools: Oscilloscope, Oscilloscope with Hookup, Alternator Ripple Test
How to change a language in Ford IDS program:
IDS languages: English, Deutsch, Fransis, Italiano, Español, Nederlands, Svenska, Suoml, Dansk, Norsk, Portugues (European), Portugues (Brazilian)
Select any language you need
January 31, 2018 by 3635OBD2
Here you are:
copy the immo information from a cluster to another
make the mileage follow with the immo information
Audi a4 2001
Digiprog3, or ecu programmers like Xprog, Carprog, UPA-USB programmer
The Jaeger cluster barely works
read the pin code from both the Instrument and adapt it to the vehicle
What to do on pin 21 and 22 on the chip:
- With ECU programmers:
Buy yourself Xprog-M programmer, Carprog, UPA-USB.
Pin 21 and 22 jumper after programming or wait 10 minutes.
- with Digiprog3:
Eeprom HC12 read and write to the other counter:
AUDI MM AB 8/2001 DIAGNOSIS / TACHO DIAGNOSIS
(Write down the exact ALWAYS old / incorrect Mileage)
The diagnostic port is in the driver's footwell. Turn the ignition
on a vehicle. Connect plug ST16 the diagnostic port and the
Select the program: cars / trucks - AUDI - MM 4 / 99- DIAG.
The DIGI PROG II shows you the old / incorrect Mileage.
Enter the new / correct Mileage and confirm this.
Should be then after programming on the speedometer 999999 KM give
The old / wrong KM value again so that the speedometer again the old /
false indicates KM. Now you build the speedometer and break it to the
see board. Solder the green and black wire to the same color marked
Arrows at. Now connect the blue and the green plug with
the speedometer and plug ST41 with the DIGI PROG (picture on the following page.)
Now select the program: cars / trucks - AUDI - MM 4/99 HC12.
The DIGI PROG shows you the old / incorrect Mileage. Enter the
new / correct Mileage and confirm this with the hook.
Now shows you the DigiProg II 5 min wait. Remove the connection
between the DigiProg and the speedometer, wait 5 minutes and build the speedometer
again. Alternatively, for 5 min. Wait, you can also like in the image on the
next page shows the pins 21 and 22 bridges.
Here necessarily the board from any power supply (Digiprog,
external power supply, etc.), Pin 21 + 22 bridge, and then you can use the tachometer
TRY ON YOUR OWN RISK
Thanks for all tech support from members’ share at http://cartechnology.co.uk/
January 31, 2018 by 3635OBD2
VXDIAG GM Tech2Win Install Video
January 30, 2018 by 3635OBD2
VCM 2 Ford IDS v108 software Windows 7 install:
Please backup the important files on the Desktop and the disk C:, because the following operation will cover the content in the disk C:
If your computer hard disk only has on partition, please prepare a 16GB U flash drive
If you has 2 partitions, please unzip the software of CD intro any other partition except the disk C:
The install tutorial is used for IDS 108 software here:
If you think it hard to install IDS yourself, go for a IDS 108 within an internal hard drive. It’s the easiest way to have IDS 108. Just insert the disk into your PC, then you can use it directly.
That is, you have two options to own IDS 108.01.
Cheapest option: 24.99 EUR
Easiest option: IDS with an internal hard drive
Both tested no issues on Ford vehicles
Diagnostic and module programming: Confirmed!
Works good with VCM2 clone units:
|Pin code calculator||NO||NO||NO||NO||NO|
|Summary||SP177-C1 is the best VCM2 - Quality A+++|