LeapZipBlog: 3635OBD2

3635OBD2's blog

164 blogs

Volvo VIDA 2015A Program Not Start on Windows 7 Solution

August 21, 2019 by 3635OBD2  

Problem:

Last friday the Volvo VIDA 2015A software CD arrived finally. Thank you.
I am sorry, but I need your help, while I can not start the program.
I checked for the install-video and prepared everything as described.
Within the last five days I was installing on 3 different hardware all fulfilling the requirements
(2 Laptops and one desktop). WIN7 Professional SP1 (german language and keyboard) (I5
generation 3 and 4, more than 4 GB RAM, enough disk space (SSD or mSATA).
The problem is always the same:
Everything seems to work fine, but at the end I can not log in to VIDA 2015A.
It looks like starting......... but then returns to the Login screen.
I made a few screenshots to help you helping me.
There are some error message, but I have no idea if they are part of my problem.
I use completely new installation (no anti-virus program, no firewall)
Then I installed all updates until august 2019 (Using a installer from Winfuture)
and after that followed the installation process in the video step by step.

here attached with some pictures:

VIDA_no_Start

Vida_Jump_back

system-blank

Installed_Progs

IE11_version

first-start-VIDA

firewall-off

Firewall-disabled

Error1_STOPbat

all-updates

Solution:

Obdiitool.co.uk engineer suggest you change computer date/time to March, 2019. Then install patch again.

 

 

Report:

It works again. Thank you.

http://blog.obdiitool.co.uk/volvo-vida-2015a-program-not-start-solution/

How to Add SMR-d to Benz C6 DoIP VCI DTS Monaco?

August 20, 2019 by 3635OBD2  

Here's the instruction to add SMR-d and Configure DTS Monaco engineering software for OEM Benz C6 DoIP VCI.

Software HDD should be purchased alone (comes with keygen and DTS Monaco software).

 

Add DTS Monaco SMR-d operation:

Open DTS System Configurator on desktop, select Interfaces, right click to open new interface 

configure-benz-c6-dts-monaco-1
Manually enter Interface "C6", press Next
configure-benz-c6-dts-monaco-2
Configure Benz C6 VCI as picture below
D-PDU API: Bosch_D-PDU_APO_Bosch_MTS6532
Module: MODULE_TYPE-ID_MTS6532
Cable:OBD_STICABLE_ONLY
configure-benz-c6-dts-monaco-3
Select CAN I interface link
configure-benz-c6-dts-monaco-4
Enable Benz C6 DoIP as picture below
configure-benz-c6-dts-monaco-5
Choose eCOM CBF (DCDIPartP)
configure-benz-c6-dts-monaco-6
Select Project administrator, create new project
configure-benz-c6-dts-monaco-7
Select modular optimized database  (*.SMR-*)
configure-benz-c6-dts-monaco-8
Add CGW_204.smr-d
configure-benz-c6-dts-monaco-9
Project: CGW_204
configure-benz-c6-dts-monaco-10
Add CGW_204.smr-d success
configure-benz-c6-dts-monaco-11
configure-benz-c6-dts-monaco-12
Enter DTS Monaco software
configure-benz-c6-dts-monaco-13
select CGW_204 project
configure-benz-c6-dts-monaco-14
login project
configure-benz-c6-dts-monaco-15
configure-benz-c6-dts-monaco-16
Now can you flash modules with the DTS Monaco software.
Done.
 
www.obdiitool.co.uk
http://blog.obdiitool.co.uk/add-mr-d-to-benz-c6-doip-vci-dts-monaco/
 
 

How To Use Yanhua Porsche BCM Key Tester

August 20, 2019 by 3635OBD2  

New coming!!!Want to know whether the Porche key is working? Is remote working? The Yanhua Porche BCM key tester will tell you

Here we are:

Youtube video demo:

how-to-use-yanhua-porsche-bcm-tester-1

 

Integrated interface board makes installation simple and efficient

how-to-use-yanhua-porsche-bcm-tester-2


It can detect whether the current key remote is working

Pressing the key button when the green light lighting, it indicates that the current key remote is working

how-to-use-yanhua-porsche-bcm-tester-3

 

Placing the key on the induction coil

Porsche BCM tester can detect whether the current key can start the car

Pressing: TEST

how-to-use-yanhua-porsche-bcm-tester-4

 

When the green light lighting, it indicates that the current key can start the car

BCM tester for porsche

 

YANHUA BCM tester for Porsche source from:

http://www.obdexpress.co.uk/wholesale/bcm-tester-for-porsche.html

MPPS V16 Software Download And Install On Win10

August 19, 2019 by 3635OBD2  

MPPS V16 Win10 installation is confirmed.

just extract this dll in the rar archive to your MPPS installation folder and it should work.

https://mega.nz/#!pUA3hSLS!UHx5Y6Ww4n62OLxND7IVqK2V20eqWqv7UA9O9DGsUo0

Please try at your own lucky.

 

The safest method is to install on XP

XP download link: https://share.weiyun.com/5VP1mxN pass:1zkboe

Uploaded by obdexpress.co.uk engineer

 

This article is available with MPPS V16.1.02 software installation on XP.

 

This is working software for mpps v16 china clone:

http://www.obdexpress.co.uk/wholesale/newest-mpps-ecu-chip-tuning-edc15-edc16-edc17-checksum.html

 

MPPS V16

 

This is free software for mpps v16 china clone:

https://mega.nz/#!Q002wCSb!fNJ4qgBFKjEk-qN6QLK0v9_M803H5MJwQwbZ92gxfQo

OBDSTAR Updated Lots of Suzuki IMMO without Pin Code in Aug. 2019

August 16, 2019 by 3635OBD2  

OBDSTAR released lots of Suzuki Immobilizer/smart key programming vehicles without pin code till 2017.

The new upgrade can be applied on OBDSTAR X300 DP/X300 DP PLUS.

 

Suzuki [V30.471 Upgrade

Add BALENO 2014- IMMO system/smart key system (No Need Pincode)

Add BREZZA 2016- IMMO system (No Need Pincode)

Add CELERIO 2014- (INDIA) IMMO system (No Need Pincode)

Add CELERIO(LF) 2014-2017 IMMO system (No Need Pincode)

Add CELERIO (ID46) 2015-2018 IMMO system (No Need Pincode)

Add CELERIO (ID47) 2015-2018 IMMO system (No Need Pincode)

Add CIAZ 2014- IMMO system/smart key system (No Need Pincode)

Add ERTIGA 2013- IMMO system (No Need Pincode)

Add JIMNY 2018- Type1/2/3/4 smart key system

Add KIZASHI 2010- smart key system (No Need Pincode)

Add KIZASHI(FR) 2010-2016 smart key system (No Need Pincode)

Add S-CROSS 2014- IMMO system/smart key system (No Need Pincode)

Add S-CROSS(JY) 2013-2016 IMMO system/smart key system (No Need Pincode)

Add SWIFT(AZ) 2017- IMMO system (No Need Pincode)

Add SWIFT 2013- IMMO system (No Need Pincode) (India Area)

Add SWIFT DZIRE 2013- IMMO system (No Need Pincode) (India Area)

Add SWIFT 2014- IMMO system (No Need Pincode) (Middle East Area)

Add SWIFT(FZ) 2011-2017 IMMO system/ smart key system (No Need Pincode)

Add SWIFT DZIRE 2013- IMMO system (No Need Pincode) (South America Area)

Add SWIFT 2009-2016 IMMO system/smart key system (No Need Pin code) (South America Area)

Add VITARA(LY) 2015- IMMO system (No Need Pincode)

Add VITARA SZT 2015- IMMO system (No Need Pincode)

Add VITARA 2016- IMMO system (No Need Pincode) (South America area)

Add VITARA 2015- smart key system (No Need Pincode) (Europe area)

OBDSTAR SUZUKI UPDATE

 

http://blog.obdiitool.co.uk/obdstar-updated-lots-of-suzuki-immo-without-pin-code/

(Solved)OBDSTAR X300DP PLUS Doesn’t Appear Newest Upgrade

August 16, 2019 by 3635OBD2  

Question:There is a lot of upgrdae now but doesn’t appear in my X300DP this new upgrade, is this upgrade available only for DP Plus?

Answer: Is your device expired 1 year free update?

 

Question: and how much the price if the subscription was already expired?

Answer: Please click on here for obdstar X300DP plus yearly-upgrade subscription

 

For C configuration.

Make a payment

Leave your Machine Serial Number

obdstar customer service will help authorize.

obdstar X300DP plus has one-year-free update  obdexpress.co.uk

 

http://www.obdexpress.co.uk/wholesale/obdstar-x300-dp-plus-one-year-update.html

 

Good to know: obdstar X300DP plus has one-year-free update since the day of registration. The update site is www.obdstar.com

 

http://blog.obdexpress.co.uk/2019/08/16/obdstar-x300dp-plus-upgrade/

How to change BMW X1 2010 KM with CG Pro Programmer

August 16, 2019 by 3635OBD2  

How-to: 2010 BMW X1 mileage correction step-by-step using cg pro 9s12 programmer.

Car Model: BMW X1 (imported version)
Year: 2010 model
Instrument tray table: 35080
Guard against theft: CAS3-0L15Y
Device: CG PRO 9S12 programmer
Operation: mileage repair

Operation:
cgpro-bmw-x1-change-mileage-1
1. View specific models.

cgpro-bmw-x1-change-mileage-2
2. Record the original mileage.

cgpro-bmw-x1-change-mileage-3

cgpro-bmw-x1-change-mileage-4

cgpro-bmw-x1-change-mileage-5

cgpro-bmw-x1-change-mileage-6

cgpro-bmw-x1-change-mileage-7

cgpro-bmw-x1-change-mileage-8

cgpro-bmw-x1-change-mileage-9
3. The vehicle power off, remove the instrument module, view the style, determine the storage chip.

cgpro-bmw-x1-change-mileage-10

cgpro-bmw-x1-change-mileage-11

cgpro-bmw-x1-change-mileage-12

cgpro-bmw-x1-change-mileage-13

cgpro-bmw-x1-change-mileage-14

cgpro-bmw-x1-change-mileage-15
4. Remove the CAS module, view the style, and determine the storage chip.

cgpro-bmw-x1-change-mileage-16

cgpro-bmw-x1-change-mileage-17
5. Open the special CGPRO software and enter the corresponding operation interface.
First, clean the instrument chip, place it into the adapter and repair it into the target mileage.

cgpro-bmw-x1-change-mileage-18

cgpro-bmw-x1-change-mileage-19
6. Clean the glue on CAS module, use DB25 adapter wiring, and repair it into target mileage.

cgpro-bmw-x1-change-mileage-20
7. The instrument panel and CAS have been processed and loaded. Some will appear fault code, clear code.
cgpro-bmw-x1-change-mileage-21

8. Reset mileage success.

http://blog.obdiitool.co.uk/bmw-x1-2010-mileage-correction-with-cg-pro-programmer/

Will Yanhua MINI ACDP Replace BMW Used FEM?

August 14, 2019 by 3635OBD2  

Question: I have a used FEM for replace in original vehicle. Can Yanhua Mini ACDP perform this job?

 

The answer is Yes, exactly Yanhua Mini ACDP can do with module 2.

 

Before replacing the used FEM, please backup the IMMO data first,  then write the Immo data using ACDP Mini.

 

Here attach two images for your information:

yanhua-mini-acdp-fem-bdc-01

 

yanhua-mini-acdp-fem-bdc-02

 

 

Yanhua ACDP program FEM without welding.

yanhua-mini-acdp-fem-bdc-03

 

yanhua-mini-acdp-fem-bdc-04

 

http://www.obdiitool.co.uk

How To Use 2M2 Tank Key Cutting Machine

August 14, 2019 by 3635OBD2  

Good news!!!If you wait the Xhorse Condor Dolphin for a long time and can't get it, you can choose 2M2 Tank Machine to replace Condor Dolphin.

2M2 Magic Tank Automatic Car Key Cutting Machine

2M2 Magic Tank is very easy-to-use, Chinese and English menus are optional, with video operation.

Database version: 2019.0612

Milling cutter spindle brushless motor, ball screw drive mechanism, cross roller guide, aluminum-alloy body structure, outer casing engineering plastic, 2 in 1 clamp,Mobile APP Android control interface, easy to operate, fast and accurate, easy to carry out work.With 4 guide pins, 2 milling cutters. Work in the outside can carry with a stable chassis.

2M2 Magic Tank Automatic Car Key Cutting machine Supported Vehicles:

Europe:

For ALFAROME, For AUDI, For BMW, For CITROEN, For FERRARI, For FIAT, For FORD-EU, For HOLDEN, For IVECO, For JAGUAR,
For LANCIA, For LAND ROVER, For LDV, For MAN, For MASERATI, For MERCEDES-BENZ, For MINI, For OPEL, For PEUGEOT,
For PORSCHE, For RENAULT, For ROVER, For SAAB, For SEAT, For SKODA, For VAUXHALL, For VOLKSWAG, For VOLVO
 
USA:
For BUICK, For CADILLAC, For CHEVROLE, For CHRYSLER, For DODGE, For FORD-USA, For HUMMER, For LINCOLN, For MERCURY
Japan & Korea:
For ACURA, For DAIHATSU, For HONDA, For HYUNDAI, For INFINITI, For KIA, For LEXUS, For MAZDA,
For MITSUBIS, For NISSAN, For SSANGYON, For SUBARU, For SUZUKI, For TOYOTA

 

How to Change Cutter and Probe for 2M2 Tank Machine

Rotate the handwheel to move the middle clamp to the left.

how-to-use-2M2-TANK-machine -11

Let the middle clamp completely against the left clamp

how-to-use-2M2-TANK-machine -2

Insert the cutter/probe to the top

how-to-use-2M2-TANK-machine -3

Let the middle clamp completely against the left clamp

how-to-use-2M2-TANK-machine -4

Loosen the fixing screw of the probe.pull the probe down until the clamp platform,then tighten the screw to complete the operation

how-to-use-2M2-TANK-machine -5

Pull the probe down until it touch the clamp platform,then tighten the screw.

how-to-use-2M2-TANK-machine -6

How to Fix Key on 2M2 Key Cutting Machine Clamp?

162-T Key:

Please set the key embryo in the left side

how-to-use-2M2-TANK-machine -7

Let the front end of the key close to the first slot and does not exceed it.

how-to-use-2M2-TANK-machine -8

The key remains level on the platform and clamp it

how-to-use-2M2-TANK-machine -9

FLAT Key

Please set the key embryo in the right side

how-to-use-2M2-TANK-machine -10

Left the front end of the key close to the first slot and does not exceed it

how-to-use-2M2-TANK-machine -11

The key remains level on the bottom and clamp it

how-to-use-2M2-TANK-machine -12

FLAT Key Shoulder:

Use the stop and insert it to the right slot

how-to-use-2M2-TANK-machine -13

Block the key shoulder and clamp it.

how-to-use-2M2-TANK-machine -14

HU64 Key:

Use an HU64 clamp,insert the key and then tighten the screws

how-to-use-2M2-TANK-machine -15

Set the HU64 clamp to the bottom of the clamp in the right side and clamp it

how-to-use-2M2-TANK-machine -16

Attention,the HU64 clamp must be against this side

how-to-use-2M2-TANK-machine -17

HU66 Key

Please set the keyembryo in the right side

how-to-use-2M2-TANK-machine -18

Block the key shoulder with the edge of the clamp

how-to-use-2M2-TANK-machine -19

The key remains level on the bottom and clamp it

how-to-use-2M2-TANK-machine -20

LASER Key

Please set the keyembryo in the left side:

how-to-use-2M2-TANK-machine -21

Let the front end of the key close to the first slot and does not exceed it

how-to-use-2M2-TANK-machine -22

The key remains level on the bottom and clamp it

how-to-use-2M2-TANK-machine -23

Laser Key Shoulder:

Use the stop and insert it the left slot

how-to-use-2M2-TANK-machine -24

Block the key shoulder and clamp it.

 

2M2 Magic Tank Automatic Car Key Cutting Machine For sale :

http://www.obdexpress.co.uk/wholesale/2m2-magic-tank-key-cutting-machine.html

OBD2 odometer correction Tool Buying advice

August 13, 2019 by 3635OBD2  

Experience with OBD2 solution for odometer correction on all makes at cheap & expensive price.

 

Cheap working ones:

  1. obdstar x300m

 

- via OBD2

 

- obdstar x300m price drops to 209eur. And it can do what you paid.

 

- obdstar x300m reviews (during the past 6 months)

http://blog.obdexpress.co.uk/2019/08/09/obdstar-x300m-price-drops/

OBDSTAR DP Plus mileage correction feedback (from 7th October, 2015 to now and future)

https://www.digital-kaos.co.uk/forums/showthread.php/491145-OBDSTAR-Mileage-Correction-Feedback/

 

- Free download: obdstar x300m vehicle coverage

 

  1. Clone digiprog 3 4.94

- Method: besides via OBD, it allows the user to change KM via Chip, Cluster & BCM, Tacho & BSI, Micro, EWS, etc.

 

- digiprog 3 4.94 coverage:

http://www.mileageprogrammer.com/digiprog-3-vs-obdstar-x300m-mileage-programmer/

 

- digiprog 3 4.94 reviews

http://blog.obdexpress.co.uk/2017/09/22/digiprog3-v4-94-mileage-correction-car-list/

 

Less expensive one:

OBDSTAR DP Plus is a full OBD2 solution for odometer correction on all makes. Go to the official site http://en.obdstar.com/Function%20List.html you are able to view the vehicle list.

OBDSTAR X300 DP PLUS ODOMETER CORRECTION

 

Expensive ones:

  1. Enigma is probably the best on the long run

 

  1. DP4 its the best for this job diagpro4  but very expensive

Read article: DP4 or DP3, which one better

 

Conclusion:

Problem will start if you have only 1 tool and this fails. And if it damage the dash for example on VAG you will have problems with immo and keys too and each fail will cost you much time and most time money too.

You will need good programmer too to fix dashes if anything happens.

Just my opinion - buy some tools just for 1 brand and good programmer to start to work or better play at beginning.

 

 

 Source:http://www.mileageprogrammer.com/need-universal-obd2-odometer-correction-tool/