LeapZipBlog: pyrolysispalnt

pyrolysispalnt's blog

73 blogs

Waste tyre recycling pyrolysis plant with CE&ISO approved

September 27, 2018 by pyrolysispalnt  

pyrolysis plant

With the development of economy, the number of autos has become more and more, and the number of tires that are replaced from automobiles is also amazing. These waste tires have caused a new type of pollution called "black pollution" to the environment. Moreover, the characteristics of used tires determine that if the tires are scrapped, they cannot be maintained, otherwise they will cause traffic accidents. How to deal with these used tire defects does not cause secondary pollution and damage to the environment. This is something that the entire community should consider. Waste tyre recycling pyrolysis plant was thought and used by Henan Doing Mechanical Equipment Co., Ltd in this situation. Tires come from petroleum, and waste tyres are then pyrolyzed and converted into fuel, carbon black and steel wire. This process can well avoid the increase of black pollution in the world environment.

The main workflow of the Waste tyre recycling pyrolysis plant is as follows:

pyrolysis plant working process
1. Use mechanical waste tires to enter the reactor and close the inlet to prevent gas flow out.
2. Carbon, wood or fuel heating reactor, the reactor is generally 200-300 degrees is the beginning of the cracking reaction, when the waste tires vaporized into oil vapor.
3. The hydrocarbons entering the condensing system are liquefied into oil and collected in the tank unit. Our system has a negative pressure device, he can greatly enhance the production of pyrolysis oil.
4.Liquefied petroleum gas that can not be liquefied under atmospheric pressure is returned to the reactor as fuel for combustion, which is not only energy saving and environmental protection.
5. After the completion of oil production, the reactor will be cooled. When the temperature drops to 40 degrees, the carbon black and wires will be removed automatically or manually.

Many success project cases have proved that Waste tyre recycling pyrolysis plant can not only beautify our living environment, but also bring huge profits to us. Because scrap tires can be turned into fuel oil (about 45-50%), carbon black (30-35%), steel wire (15-20%) and some combustible gases by using a cracker. These regenerants from Waste tyre recycling pyrolysis plant can be used in all aspects of life:

fuel oil usage
1. Fuel oil: Can be used in steel mills, boiler heating, heavy oil generators, cement plants.

carbon black usage


2. Carbon black: can be used for pressure ball burning and refining flour, refined flour and can be used for new tires, rubber soles, pigment manufacturing materials.
3. Steel wire: mainly used for scrap recycling and re-casting.
4. Combustible gas: Equipment will be recycled again, for reactor heating.

The main advantages of Henan Doing Mechanical Equipment Co., Ltd's Waste tyre recycling pyrolysis plant are as follows:

DOING 3D pyrolysis plant


Safety:
1. Automatic welding, improve work efficiency, ensure machine quality, avoid accidents.
2. Special design to avoid paper jam caused by X-ray inspection and ensure safe operation.
3. The vacuum system ensures that the entire production line runs well.
Environmental protection:
1. Dust removal and sulfur removal system to remove smoke and sulfur.
2. Exhaust gas (including methane to butane) will be directly recycled to the fuel furnace without gas pollution.
High oil yield:
1. Three cooling processes to ensure full liquefaction of oil and gas.
2. The catalyst chamber ensures complete pyrolysis of the feedstock.
long lasting:
1. Special boiler plate: 16mm thick Q245R.
2. Automatic welding ensures the service life of the machine and its service life will reach 8-10 years.
Energy saving:
1. The heating system is well-sealed, airtight, and fuel-efficient.
2. Exhaust gas will be recycled for reactor heating.
Good after-sales service:
1. Overseas tour guides install and train customer staff and try to run.
2. One year warranty.

Other Waste tyre recycling pyrolysis plant also have such advantages? Any questions about the Waste tyre recycling pyrolysis plant, please feel free to contact me!

We also provide:waste plastic pyrolysis plant,continuous pyrolysis plant,waste oil to diesel plant,scrap copper wire recycling machine,PCB recycling machine and so on!

 

Know more detail information ,click to chat us online!

 

Contact: Ms Bonnie
Phone: +86-371-5677 1821
Whatsapp:0086-135-2669-2320
Skype: bonniezhao2
Email: oilmachine@wastetireoil.com
http://www.recyclingpyrolysisplant.com
http://www.wastetireoil.com

 

Tires recycled to fuel oil pyrolysis plant with factory price

September 27, 2018 by pyrolysispalnt  

tire pyrolysis plant

As people's living standards improve, the car has become a must-have for people's travel. A wide variety of cars in the streets and lanes can be found everywhere. As small as bicycles to cars, people can bring different levels of travel convenience. However, all things are two-sided, these cars bring convenience to people, but also pose a certain threat to our living environment. In particular, the waste tires on these cars and the waste tires that have been piling up in landfills have caused great harm to our living environment. Faced with this social problem, DoingGroup's engineering team developed a Tires recycled to fuel oil pyrolysis plant.

The main workflow of the Tires recycled to fuel oil pyrolysis plant  is as follows:

pyrolysis plant working process


1. Use mechanical waste tires to enter the reactor and close the inlet to prevent gas flow out.
2. Carbon, wood or fuel heating reactor, the reactor is generally 200-300 degrees is the beginning of the cracking reaction, when the waste tires vaporized into oil vapor.
3. The hydrocarbons entering the condensing system are liquefied into oil and collected in the tank unit. Our system has a negative pressure device, he can greatly enhance the production of pyrolysis oil.
4.Liquefied petroleum gas that can not be liquefied under atmospheric pressure is returned to the reactor as fuel for combustion, which is not only energy saving and environmental protection.
5. After the completion of oil production, the reactor will be cooled. When the temperature drops to 40 degrees, the carbon black and wires will be removed automatically or manually.

From the Tires recycled to fuel oil pyrolysis plant working process, we can finally get 45-50% fuel, 30% carbon black, 15% waste steel wire, and 5% combustible gas. Their purpose is as follows:

fuel oil usage


Fuel: Fuel oil is widely used in ship boiler fuels, furnace fuels, metallurgical furnaces, and other industrial furnace fuels. According to use, fuel oil can be divided into marine fuel oil, furnace fuel oil and other fuel oils. According to statistics from the National Bureau of Statistics, China's fuel oil consumption is mainly concentrated in power generation, transportation, metallurgy, chemical industry, light industry and other industries.

carbon black usage


Carbon black: It is mainly used for pressure ball combustion and refined milling. Refined flour can be used for new tyres, rubber soles and pigments.
Steel wire: It can be sent to a recycling station where it can be recycled or it can be recast.
Combustible gas: It will be recycled by the Tires recycled to fuel oil pyrolysis plant and used for the heating fuel of the reactor, which is energy-saving and environmentally friendly.

The main advantages of Tires recycled to fuel oil pyrolysis plant are as follows:

pyrolysis plant project


1. Reactor press standard manufacturing, the use of 16mm thick boiler steel pipe and arc pressure head, can withstand high pressure and high temperature.
2 high standard 3-step welding process, not easy to crack, long service life.
3. Pinion rotation device, small power, does not directly contact the reactor, heat transfer less easily deformed.
4. The three-stage cooling system uses tube condensers, also known as heat exchangers, which are currently the most commonly used and best performing condensers in the oil industry. Can ensure that the cracked oil and gas fully cooled, high oil production.
5 safety device oil-water separator, water seal, vacuum device, to ensure the safe and efficient operation of Tires recycled to fuel oil pyrolysis plant.

Have you got a better understanding of our Tires recycled to fuel oil pyrolysis plant?

We also provide:waste plastic pyrolysis plant,continuous pyrolysis plant,waste oil to diesel plant,scrap copper wire recycling machine,PCB recycling machine and so on!

 

Know more detail information ,click to chat us online!

 

Contact: Ms Bonnie
Phone: +86-371-5677 1821
Whatsapp:0086-135-2669-2320
Skype: bonniezhao2
Email: oilmachine@wastetireoil.com
http://www.recyclingpyrolysisplant.com
http://www.wastetireoil.com

 

Profitable pyrolysis plant to recycle plastic with high oil yield

September 27, 2018 by pyrolysispalnt  

pyrolysis plant

Still worried about piles of waste plastic? Now Dongying Group has developed a pyrolysis plant to recycle plastic. The pyrolysis plant to recycle plastic uses high-temperature cracking principles to crack waste plastics into fuel oil, carbon black and combustible gas. Waste plastic is not only a social problem, but also a material that can bring you wealth.

What is the specific workflow for pyrolysis plant to recycle plastic?

pyrolysis plant working process
1. The collected waste plastic are sent to cracking equipment through an automatic feeder device. The reactor was heated.
2. When the reactor temperature reaches a certain level, a cracking reaction will occur and the waste plastic will be cracked into oil and gas.
3. The liquefied petroleum gas is liquefied by the condensing system into oil and gas. Uncondensed gas is filtered again through the condensing system.
4. Dust and deodorize the liquefied fuel to remove the residue after oil and gas cooling, as well as the smoke generated by the combustion of fuel.
5. After the reactor is cooled to below 40 degrees, remove the carbon black inside.

After the pyrolysis plant to recycle plastic process, you can get fuel, carbon black, combustible gas, these reusable materials, they have a wide range of uses, as follows:

fuel oil usage
1. Fuel oil can be used in steel mills, boiler heating, heavy oil power plants and cement plants to produce refined diesel for further processing and diesel generators, light fuels, heavy machinery.

carbon black usage
2. Carbon black can be used for pressure ball burning, refined toner. Can be used for new tires, rubber soles, pigments made of refined toner.
3. Combustible gas is mainly used for circulating heating reactor.

The choice of our pyrolysis plant to recycle plastic will give you an exact guarantee of your profit based on the unique advantages of our pyrolysis plant to recycle plastic. These benefits are as follows:

DOING pyrolysis plant


1. Our pyrolysis reactor is manufactured according to pressure vessel production standards using a 16mm thick boiler special steel and arc head that withstands high pressures and temperatures.
2. High standard 3-step welding process, not easy to crack, long service life.
3. Pinion rotation device, small power, does not directly contact the reactor, heat transfer less easily deformed.
4. The three-stage cooling system uses tube condensers, also known as heat exchangers, which are currently the most commonly used and best performing condensers in the oil industry. Can ensure that the cracked oil and gas fully cooled, high oil production.
5. Our pyrolysis plant to recycle plastic has the following safety devices: water separator, water seal, vacuum device. They prevent oil and gas backflows. Provide negative pressure, drainage oil and gas, so as to maximize the oil yield.

Do you have any other questions about our pyrolysis plant to recycle plastic? Please feel free to contact me! ! !

We also provide:waste plastic pyrolysis plant,continuous pyrolysis plant,waste oil to diesel plant,scrap copper wire recycling machine,PCB recycling machine and so on!

 

Know more detail information ,click to chat us online!

 

Contact: Ms Bonnie
Phone: +86-371-5677 1821
Whatsapp:0086-135-2669-2320
Skype: bonniezhao2
Email: oilmachine@wastetireoil.com
http://www.recyclingpyrolysisplant.com
http://www.wastetireoil.com

 

One set 10T waste oil refining equipment delivered to India

September 27, 2018 by pyrolysispalnt  

Congratulations to Indian customer ‘s one set 10T/D waste oil refining equipment was successfully delivered from our factory yesterday.

India refining equipment

This customer is from India, but is an engineer in offshore oil and gas drilling engineering in Singapore. In the oil and gas industry, has a very rich experience. Now he want to start his own business, he has a waste tire oil deep processing business in India, and he has learned about many manufacturers' waste oil refining equipment. But after comparing the manufacturers he consulted before, he still feel that our waste oil refining equipment is the most professional.

oil refining equipment

Before coming to visit our waste oil refining equipment, the customer asked his friends in China to check our waste oil refining equipment. His friend’s initial impression of our waste oil refining equipment was very good, and he immediately arranged his friend paid a deposit. Later, after the customers came to our company to visit the waste oil refining equipment, through the further understanding of  our company, the production factory and our waste oil refining equipment, he became more determined to purchase our waste oil refining equipment.

Indian customer in our company

Now the waste oil refining equipment has been already delivered. Our engineers are now flying to New Delhi, India, and are preparing to provide detailed on-site guidance installation services for  the 10T/D waste oil refining equipment.

 


We also provide:waste plastic pyrolysis plant,continuous pyrolysis plant,waste oil to diesel plant,scrap copper wire recycling machine,PCB recycling machine and so on!

 

Know more detail information ,click to chat us online!

 

Contact: Ms Bonnie
Phone: +86-371-5677 1821
Whatsapp:0086-135-2669-2320
Skype: bonniezhao2
Email: oilmachine@wastetireoil.com
http://www.recyclingpyrolysisplant.com
http://www.wastetireoil.com

 

Diesel and gasoline integrated machine delivered to Canada

September 18, 2018 by pyrolysispalnt  

Canadian customers operate a relatively large waste recycling plant locally. It took 4 years to conduct field research on this diesel and gasoline integrated machine, and the quality of the diesel and gasoline integrated machine provided by each supplier is very clear. He finally chose to work with us, mainly to the satisfaction of the quality of our diesel and gasoline integrated machine.

diesel and gasoline machine
The purchase of this diesel and gasoline integrated machine by the customer is mainly used for heavy truck machinery fuel oil in the garbage collection plant. Of course, this is only the customer's usage of our
diesel and gasoline integrated machine. Through our diesel and gasoline integrated machine, we can finally get diesel, gasoline, heavy oil, carbon black and combustible gas.

diesel and gasoline machine
Moreover, the biggest advantage of the
diesel and gasoline integrated machine is the automatic PLC control system and integrated design, which is easy to operate and has a small land occupy. It can directly extract light oil from waste plastic waste recovered by customers and achieve the effect of separation of diesel and gasoline.

diesel and gasoline machine

 

 

This is also the main reason for customers to purchase our diesel and gasoline integrated machine. According to customer feedback, the local labor resources are very scarce. Because our diesel and gasoline integrated machine is fully automatic, our diesel and gasoline integrated machine can save a lot of labor costs for our customers!

 

We also provide:waste plastic pyrolysis plant,continuous pyrolysis plant,waste oil to diesel plant,scrap copper wire recycling machine,PCB recycling machine and so on!

 

Know more detail information ,click to chat us online!

 

Contact: Ms Bonnie
Phone: +86-371-5677 1821
Whatsapp:0086-135-2669-2320
Skype: bonniezhao2
Email: oilmachine@wastetireoil.com
http://www.recyclingpyrolysisplant.com
http://www.wastetireoil.com

 

Congratulations Indian customer 12T/D plastic to oil pyrolysis plant runs smoothly

September 18, 2018 by pyrolysispalnt  

Congratulations to the 12T/D plastic to oil pyrolysis plant successfully running of the Indian customer, which was installed under the guidance of our engineers and tested and everything worked fine.

Indain pyrolysis plant
Indian customers are from Sodium. Currently operating a paper mill, our plastic to oil pyrolysis plant  is mainly used to dispose of the the paper-mill waste.
Fuel, carbon black, and combustible gases are available through our 12-ton
plastic to oil pyrolysis plant. The ratio of each product depends on the type of waste plastic. Because the oil content of different waste plastics is different, the oil yield is also different.
The following is the oil yield of different waste plastics we have summarized for your reference:
Because the scraps processed by customers are wastes that are very headaches for many paper mills, customers who purchase our
plastic to oil pyrolysis plant can now process these wastes with any cost. We analyze the profitability of our customers as follows:

different kinds waste plastic oil yield
The customer can get 7.2 tons of fuel oil, 3.8 tons of carbon black and 0.24 tons of combustible gas with a 12-ton paper-mill waste.
According to the current conservative valuation of fuel oil in the market, one ton of 364 US dollars, 7.2 tons of fuel can earn $ 2621.

fuel oil usage
The obtained 3.8 tons of carbon black can be sold directly or refined into a mill. Their income is different.
The combustible gas will be recycled and reused by the plastic to oil
pyrolysis plant for heating the fuel in the reactor, saving energy and environmental protection.
We hope that customers will recover their costs as soon as possible and get the expected benefits by our plastic to oil pyrolysis plant.

 

 

We also provide:waste plastic pyrolysis plant,continuous pyrolysis plant,waste oil to diesel plant,scrap copper wire recycling machine,PCB recycling machine and so on!

 

Know more detail information ,click to chat us online!

 

Contact: Ms Bonnie
Phone: +86-371-5677 1821
Whatsapp:0086-135-2669-2320
Skype: bonniezhao2
Email: oilmachine@wastetireoil.com
http://www.recyclingpyrolysisplant.com
http://www.wastetireoil.com

 

The worlds best and leading waste tyre pyrolysis plant manufacturer

September 18, 2018 by pyrolysispalnt  

If you haven’t choose the best quality pyrolysis plant , the process will be slow and difficult to control. You may feel that you should do something, which of course is a proper pyrolysis plant may be helpful. It simplifies the process and it is help for your business.
pyrolysis plant
If you are looking to buy, firstly you need to find the ideal manufacturer of
pyrolysis plant .
Please allow me to share the guidelines and make them a more natural process.

Assess reputation

Your investment should not be blind unless you are content to lose money or take risks.

The goal must be to look at the status of manufacturers of
pyrolysis plant and see what equipments they are all provided. If you are satisfied with what they are provided inculding thire quality, you may end up with a world-class pyrolysis plant .

Henan Dongying Machinery Equipment Co., Ltd. is a manufacturer dedicated to the research and development of environmentally friendly large and medium-sized renewable energy recycling and
pyrolysis plant . It has been a leader in the industry for its excellent products, sincere service and good reputation. The company has a research institute and a new product experimental base for the development of new products. So far, Henan Dongying Machinery Equipment Co., Ltd.'s pyrolysis plant has been successfully installed and operated in more than 50 countries and regions, such as Italy, Macedonia, Iran, Egypt, Mexico, Ecuador, Haiti, Congo, Uganda, Nigeria, India, Pakistan, Thailand, Malaysia. , Bangladesh, Guatemala, etc.
pyrolysis plant cases
Determine cost

Cost will be what you really want to know and most important thing.


There may be many problems, one of which may involve your business. It is important to include ensuring that costs are consistent with what you are pursuing. For those who choose a top quality
pyrolysis plant , you want to evaluate which investment will drive you.

If you have any investment needs in this area, please feel free to contact us and tell us your specific requirements for pyrolysis plant configuration. We will develop a full set of project feasibility report analysis and ROI analysis for your investment to avoid risks.

Comparison

Don't hesitate to evaluate the manufacturer of
pyrolysis plant  because there are many on the market and everyone recommends it to provide the best pyrolysis plant. You need to take the time to evaluate what their pyrolysis plant have to offer and how they are produced with your business.

Keep in mind that if you really know what you actually get, it will be a factor to compare the
pyrolysis plant .


If you are choosing
pyrolysis plant and don't know who is good, you are welcome to come to Henan Dongying Machinery Equipment Co., Ltd. to see what is called professional.

Characteristics of
pyrolysis plant produced by Henan Dongying Machinery Equipment Co., Ltd.:


doing pyrolysis plant
1. The quality is reliable, safe, environmentally friendly, long life and easy to operate.

2, Can provide process design, installation, commissioning, generation of technical personnel;

3. Undertake the relocation, technical transformation and turnkey projects of the old factory.
pyrolysis plant final products
The raw materials that can be processed by
pyrolysis plant are waste tires, waste plastics and other raw materials. The pyrolysis plant uses these waste tires and waste plastics as raw materials, and undergoes pyrolysis reaction. The products obtained from the waste tires are pyrolysis oil, carbon black and steel wire, and the obtained products of the pyrolysis plant are pyrolysis oil and carbon black. The entire pyrolysis process is environmentally friendly and non-polluting.

pyrolysis plant  process: (taking waste tires as raw materials for example)


pyrolysis plant working process
a feeding, it takes 1-2 hours, tires below 1.4 meters can be directly fed into the whole tire, large tires need to be cut first and then fed;

b heating, it takes about 10 hours, generally heating up to 2 hours will produce oil and gas;

c cooling, the oil and gas is condensed into oil through the cooling system;

d Exhaust gas recycling, in the process of heating cracking, in addition to oil and gas, there will be some flammable but non-condensable gas, we call it "exhaust gas", this gas can be directly recovered for heating cracking reactor to save fuel ;

e Carbon black and steel wire slag, and other cracking processes are completed. After the oil and gas is discharged, the residual material inside the reactor needs to be discharged to carry out a new cracking process. These residual materials mainly include the steel wire for making carbon black of the tire.

DOING pyrolysis plant customer visit
Henan Dongying Machinery Equipment Co., Ltd. adheres to the principle of “safety, high efficiency and low consumption” with its high service and technology aggregation enterprise's own competitiveness, and is highly praised and trusted by users at home and abroad. Henan Dongying Machinery Equipment Co., Ltd. welcomes domestic and foreign customers to visit!

We also provide:waste plastic pyrolysis plant,continuous pyrolysis plant,waste oil to diesel plant,scrap copper wire recycling machine,PCB recycling machine and so on!

 

Know more detail information ,click to chat us online!

 

Contact: Ms Bonnie
Phone: +86-371-5677 1821
Whatsapp:0086-135-2669-2320
Skype: bonniezhao2
Email: oilmachine@wastetireoil.com
http://www.recyclingpyrolysisplant.com
http://www.wastetireoil.com

 

Pyrolysis plant reactor design

September 7, 2018 by pyrolysispalnt  

pyrolysis plant

Now with the country's emphasis on environmental issues, more and more people are beginning to know and pay attention to waste pyrolysis plant. And many people are in the situation of want to investing in  the pyrolysis project, but do not know how to determine the quality of the pyrolysis plant. Today we will explain from the most core component of the pyrolysis plant  - the pyrolysis plant reactor design.

pyrolysis plant gear

Our pyrolysis plant reactor adopts small gear transmission. Compared with big gear transmission, small gear cannot be easily deformed. The gear will be fixed on the oil output pipe there will be some gap between gear and reactor, so only little heating energy will be transferred to the gear and also there are some heating releasing holes on the gear which will not be out of shape easily.

Another pyrolysis plant reactor design is the supporting roller. Even though the roller is small, but it is the core part of pyrolysis plant. There are totally 4 rollers to support the pyrolysis plant reactor. Take capacity 10T pyrolysis plant for example, the weight of naked reactor is about 10T, after feeding 10T waste tyres ,the whole system will be 20T. It means these 4 rollers have to bear 20T weight. If one roller breaks, the whole system will stop working. So the roller must be strong enough. That is why we choose casting steel as the roller material ,as casting steel is not easy to deform.

pyrolysis plant reactor

Our pyrolysis plant reactor design is made strictly according to the standard of pressure vessels(boiler grade).The round-shape reactor head has very strong tension and good connection with the reactor body, thus could not be cracked under high pressure and high temperature. The pyrolysis plant reactor material could be made from Q245R and Q345R boiler plates or 304 and 306 stainless steel. The thickness of the whole reactor is normally 16mm.

pyrolysis plant welding

The welding of our pyrolysis plant reactor adopts 3-steps welding process, spot welding first, then make a groove like the one showed in the right picture for better  auto-welding. 

Of course, determining the quality of the pyrolysis plant not only includes the level of pyrolysis plant reactor design, but also the condensation effect of the condensing system, as well as the environmental protection system of the pyrolysis plant. Contact DOING company, you will get the most professional pyrolysis plant details, with the local feasibility analysis report of the pyrolysis plant  and the subsequent equipment guidance installation and other services.

 

We also provide:waste plastic pyrolysis plant,continuous pyrolysis plant,waste oil to diesel plant,scrap copper wire recycling machine,PCB recycling machine and so on!

 

Know more detail information ,click to chat us online!

 

Contact: Ms Bonnie
Phone: +86-371-5677 1821
Whatsapp:0086-135-2669-2320
Skype: bonniezhao2
Email: oilmachine@wastetireoil.com
http://www.recyclingpyrolysisplant.com
http://www.wastetireoil.com

12T/D plastic to oil pyrolysis plant delivered to Nigeria

September 7, 2018 by pyrolysispalnt  

Congratulations to the smooth delivery of the 12T/D plastic to oil pyrolysis plant delivered to Nigeria. The client is the owner of a hardware business in New Delhi, India. Because one of his friend is engaged inplastic to oil pyrolysis plant, he found that investing in this plastic to oil pyrolysis plant can get huge profitable. After deciding whether to invested in plastic to oil pyrolysis plant, he began to consult different manufacturers through various channels. The customer learned about our plastic to oil pyrolysis plant through our company's Alibaba store. After carefully learned about our plastic to oil pyrolysis plant and compared several suppliers he have consulted before, he decided to cooperate with us. But the plastic to oil pyrolysis plant this India customer bought is not installed in India, but in Nigeria. As we know that plastic to oil pyrolysis plant is not new in India. As far as we know there should be more than one thousand plastic to oil pyrolysis plant operated in India already, so the market competition is very big.

Lagos is the old capital of Nigeria and the largest port city. At the southwestern tip of the country, along the Gulf of Guinea. It consists of 6 small islands and mainland parts of the Ogun River estuary. The area is 74 square kilometers. The main island of Lagos is a city centre with a bridge between Ikoyi, Victoria and the mainland. Lagos is an industrial and commercial center with a well-developed transportation. Customers who choose to install theplastic to oil pyrolysis plant in this port city are also take the city’s economic and sea and land transportation conditions into considerations.

 

Instead to get small profit in the market with high competition, the India customer decided to install the plastic to oil pyrolysis plant in Logos, Nigeria, where the customer also has business there.

Now our team of engineers has already boarded a flight to Lagos, Nigeria, ready to provide on-site guidance installation services for customer’s plastic to oil pyrolysis plant.

 

We also provide:waste plastic pyrolysis plant,continuous pyrolysis plant,waste oil to diesel plant,scrap copper wire recycling machine,PCB recycling machine and so on!

 

Know more detail information ,click to chat us online!

 

Contact: Ms Bonnie
Phone: +86-371-5677 1821
Whatsapp:0086-135-2669-2320
Skype: bonniezhao2
Email: oilmachine@wastetireoil.com
http://www.recyclingpyrolysisplant.com
http://www.wastetireoil.com

2 sets 12T/D pyrolysis plant for waste recycling install in Ningxia, China

September 7, 2018 by pyrolysispalnt  

Yesterday, under the guidance of our engineering team, the two sets of pyrolysis plant for waste recycling were completely installed in Shizuishan, Ningxia. The customer is very satisfied with our pyrolysis plant for waste recycling and post-installation guidance service.

pyrolysis plant

The customer who boughted the two sets pyrolysis plant for waste recycling installed in Ningxia is from Fuyang City, Anhui Province, China. They have been doing business in Ningxia. As there are already several sets pyrolysis plant for waste recycling operated in Anhui, in order to find a new and better market, they decided to install the two sets pyrolysis plant for waste recycling in Ningxia.

pyrolysis plant

Both the two sets of pyrolysis plant for waste recycling are belong to our high-matching series, equipped with pulse dust removal, automatic feeder and other high configuration device.

pyrolysis plant

After the two sets of pyrolysis plant for waste recycling are put into operation and bring some benefits to the customers, the customer is ready to purchase another 4-6 sets of pyrolysis plant for waste recycling from us to expand the scale of operation. We are looking forward to the next cooperation with the customers, and we wish our customers get the expected benefits as soon as possible!

 

We also provide:waste plastic pyrolysis plant,continuous pyrolysis plant,waste oil to diesel plant,scrap copper wire recycling machine,PCB recycling machine and so on!

 

Know more detail information ,click to chat us online!


 

Contact: Ms Bonnie
Phone: +86-371-5677 1821
Whatsapp:0086-135-2669-2320
Skype: bonniezhao2
Email: oilmachine@wastetireoil.com
http://www.recyclingpyrolysisplant.com
http://www.wastetireoil.com