LeapZipBlog: Austere Pumps

Austere Pumps's blog

3 blogs

Some Quick Fixes For Your Irrigation System

April 18, 2019 by Austere Pumps  

For your lawn to remain green all through the year, it is necessary to get a good irrigation system installed. You may decide to depend on nature for rainfall but this may disappoint you and before you know it, the entire garden that you spent a lot on has turned yellowish. However, by installing an automatic system, you can be able to avoid this. There are different types of irrigation and Packaged pump station systems that can give you the best results.

That said there is no guarantee that because you have a good sprinkler system installed you will not need repairs. Sometimes, even the best system will break down and you may need to call in reticulation and Packaged pump station sewer services to come and help. However, before calling a professional, it may be better to check that the issue with the system is not something you can handle. Unknown to most homeowners, it is possible for them to handle most of the problems that occur with their system. While you may not need expertise level skills to be able to correct issues with your system, you may still need a multi-meter to be able to detect the problem. Some issues that may occur with your system are discussed below and possible quick fixes suggested.

Faulty sprinkler head

To identify issues with sprinkler heads is not very difficult. You just need to look out for broken or cracked heads. Another indicator is placed where water no longer sprays normally or where water has completely stopped flowing. The simplest fix for this type of problem is to get the head replaced. This may require digging around the head to expose the riser. You can also get assistance from Sewer Pump station for most favorable results. If you decide to do this repair yourself, make sure to call the company that installed the system so you can be sure where the lines are. If the problem is that the heads are blocked, simply clean the head and replace it.

Low-pressure issues

If the sprinkler is spraying low volumes or some parts are not spraying at all, what you should be looking or is the pressure at the valve. Check that the valves are fully open. If the valves are already opened, you may have to replace the valve. If there is a leak, locate it and seal it. If this does not work, replace the valve. Another cause of low pressure may be that the pipes are crushed. If they locate them and fix accordingly. You should try your hands at Fibre Pump stations which is very useful for your procedures.

Problem with zoning

Most systems are divided into different zones. Each zone designed to be controlled by an electric valve. Any zone that is not functioning properly may be as a result of an electrical problem. If all the electrical connects are correctly connected, you should test the voltage in the zone that is not working to see if it falls within the required range.

Properly managing the use of water in your lawn

April 4, 2019 by Austere Pumps  

During summer months, water resources are stressed as demand on them increases. This may be a problem for those with lawns who may have to look for ways to be more efficient when it comes to managing their lawns and their water resources. At such time when there is a high demand on the water resources, it is important to manage these resources correctly by managing our expectations and those of nature. If you are thinking about Grease Arrestor then it can give you best suitable results.

The use of water outside of the house may be linked to the washing of cars and probably refilling pools. Nevertheless, most of this goes to keep the lawn looking fresh. For the most part, because of lack of knowledge in efficient watering techniques, the majority of the water is wasted, you should test Grease Trap solutions. The good part is that the homeowner can do their part in reducing the amount of water of they use. This will not only help reduce their utility bill but will also help reduce water wastage. Actually, if you can manage the water correctly, it can actually improve the quality of the plants in the garden. The following are tips for managing your lawn and using water efficiently.

Spot issues with the lawn

If there is water seeping in the lawn, there may be issues with the irrigation system. You may have to check is the pump is having issues. If that is the case, you should get Grease Interceptor done immediately you notice so that there will not be a lot of wastage. Additionally, when mowing the lawn, make sure to keep the blade neat and moderate height.

Control water

To control the amount of water you use, make use of the following tips.

Try to keep water on the plants moderate with the help of Fat and Oil Removal. Too much water or too little water can affect the growth of the plant

·         Try to time the water flow to the time it takes for the sprinkler to deliver one inch of water. You can do this by placing a can with the one inch point marked clearly on it. Check the time it takes for the sprinkle to fill the can to the one inch point. This is the time to leave the sprinkler on for the water to be able to penetrate to a depth of one inch.

·         It is also important to time the best moments to water. Most often it will be between 9 at night and 9 in the morning.

·         Note that if you notice water running across the surface, you may have over watered or you have not allowed enough time for the water to seep into the surface.


If you take these measures, you should be able to reduce the amount of water you use in keeping your lawn in good shape.

How does the oil water separator works?

March 26, 2019 by Austere Pumps  

The oil water separator is basically the device which is used to treat the wastewater to the standard where it is really much safe for the discharge into the approved discharge point, the most common is the sewer. It removes grease, hydrocarbons and oils thereby leaving only non-hazardous water which may even be disposed safely in the drainage.

The businesses will need the Oily Water Separators if they are:

a) Creating wastewater being the part of the normal operation

 b) Liquidating the wastewater in the public drains

 c) Looking to attain the compliance of water authority

The precise kind of the Oily water Separator manufacturers required by the given business would actually depend on kind of the wastewater which is being produced and local water authority requirements of the area.

Different kind of the oil Oily water separator requirements the oil water separators are basically divided in below mentioned four categories:

1.        Coalescing

2.        Hydrocyclone

3.        oil interceptor pits and petrol

4.        Vertical gravity

How does each system works?

1. Coalescing

This is the much common used set of models, coalescing of the oil water separators actually remove grease, oils and hydrocarbons from the wastewater at the time of adhering to the predefined standards of the discharge. The Media packs are also positioned in 2 different stages to always force the free oil droplets that could also impinge on the surface area. For impingement on the media packs, droplets will rise to surface and are also well skimmed off in the container of the waste oil. With the help of Oily water Separator PDF you will get the precise and complete information

2. Hydrocyclone

Hydrocyclone oil separators mainly work by sending the wastewater through the 'cyclone chamber’ that mainly applies for the extreme forces of centrifugal. The intense force mainly causes the water as well as the oil droplets for separating.

3. Oil and Petrol Interceptor

The systems specifically feature 2-3 compartments of the gravity flow systems that mainly work on premise which petrol, diesel and hydrocarbons float above the level of water. Hence, contaminates may also be separated as well as skimmed from the wastewater.

4. Vertical gravity

The separators operate of Vertical gravity through controlling both the fluid velocity as well as the pressure. Such forces are mainly utilized for the purpose to separate various sets of the impurities from the water, hence it allows the contaminants to drain off in the waste areas.

Why the treatment of the wastewater is critical?

The waterways as well as local environments are quite much precious. They are important for the preservation of flora & fauna, and also to ensure the ease of access for the safe and clean water.


Discharge of the much untreated wastewater in the storm water mainly drains entire local estuaries which may also lead to significant harm to environments as well as the waterways. The Water pollution may also poison the native species, thereby leading to the long-term damage to delicate the ecosystems, and also to make the water unsafe for the human interaction.