LeapZipBlog: paulakeener

paulakeener's blog

40 blogs

Thy way to get CAT Caterpillar ET 2014A License Key

October 17, 2019 by paulakeener  

Caterpillar Diagnostic Tool is Caterpillar Vehicle interaction Adapter, Caterpillar vans Diagnostic instrument. Caterpillar et software program 2014B is out there to multi-languge. Caterpillar et help support specialists to reprogram ECMs, reconfigure handle process parameters.

Thy solution to get CAT Caterpillar ET 2014A License Important at [url=file:///C:/Documents%20and%20Settings/Administrator/%E6%A1%8C%E9%9D%A2/autonumen%208-2-2/www.autonumen.com]autonumen[/url]

step1: caterpillar open electronic technician

phase 2: caterpillar digital technican asks for license

action three:caterpillar et 2014a asks for licensing

step four:copy license code

stage 5: open cat ET essential 2014a

step 6: open et2k9c.kg

action 7: caterpillar ET 2014a paste license code

move eight: caterpillar et 2014a pick membership

step 9:caterpillar et2010a copy license vital

step ten: caterpillar ET 2014a duplicate license vital

phase 11: paste license crucial in th following box

action twelve: Click authorize

stage thirteen:caterpillar et 2014a copy license granted

If BMW ICOM A2 clone with WiFi now

October 16, 2019 by paulakeener  

I have seen that the most difference between an original BMW ICOM A2 and a clone is that the original has wifi capability, whereas the clone does not.

Today the Eobd2 customer services tell me that their BMW ICOM A2+b+c diagnostic & programming tool now has wifi capability. And I saw a lot of people comment ICOM A2 clones with wifi capability that work reliably.

On the more technical side, I’ve encountered through the grape vine that the new units that they add as a wifi Module is, “a Sparklan WMIA-199N based on an ATHEROS MIMO chip.”

Apparently it is possible to, “get a fully functional Mini PCI port between the layers”(of the ICOM A2’s internal circuit boards that would allow for incorporating a wifi mod).

You can get some information of BMW ICOM A2+B+C below:
BMW ICOM A2+B+C Functions:

A2 – OBD diagnostic supporting MOST, D-CAN and K-CAN protocols

B – Diagnostic via most bus, and have connection to A-interface via USB connection.

C – 20-pin cable for old models.

BMW ICOM A2+B+C Special Features Compared with BMW ICOM:

The modified BMW ICOM A2 for vehicles with OBD access receives a significantly more powerful processor and more storage capacity. Robust aluminium case will help to avoid damage when using in harsh environments.

To protect the most connector, the BMW ICOM B for vehicles with optical most access will be equipped with a soft cover made of rubber instead of the former plastic cap.

The BMW ICOM C for old series with a diagnostics socket will be additionally equipped with an approx. 20 cm long cable, which facilitates the connection of the BMW ICOM A2 and makes storage in the engine compartment easier.

Thy way to get CAT Caterpillar ET 2014A License Key

October 10, 2019 by paulakeener  

Caterpillar Diagnostic Tool is Caterpillar Vehicle interaction Adapter, Caterpillar vans Diagnostic instrument. Caterpillar et software program 2014B is out there to multi-languge. Caterpillar et help support specialists to reprogram ECMs, reconfigure handle process parameters.

Thy solution to get CAT Caterpillar ET 2014A License Important at [url=file:///C:/Documents%20and%20Settings/Administrator/%E6%A1%8C%E9%9D%A2/autonumen%208-2-2/www.autonumen.com]autonumen[/url]

step1: caterpillar open electronic technician

phase 2: caterpillar digital technican asks for license

action three:caterpillar et 2014a asks for licensing

step four:copy license code

stage 5: open cat ET essential 2014a

step 6: open et2k9c.kg

action 7: caterpillar ET 2014a paste license code

move eight: caterpillar et 2014a pick membership

step 9:caterpillar et2010a copy license vital

step ten: caterpillar ET 2014a duplicate license vital

phase 11: paste license crucial in th following box

action twelve: Click authorize

stage thirteen:caterpillar et 2014a copy license granted

If BMW ICOM A2 clone with WiFi now

October 9, 2019 by paulakeener  

I have seen that the most difference between an original BMW ICOM A2 and a clone is that the original has wifi capability, whereas the clone does not.

Today the Eobd2 customer services tell me that their BMW ICOM A2+b+c diagnostic & programming tool now has wifi capability. And I saw a lot of people comment ICOM A2 clones with wifi capability that work reliably.

On the more technical side, I’ve encountered through the grape vine that the new units that they add as a wifi Module is, “a Sparklan WMIA-199N based on an ATHEROS MIMO chip.”

Apparently it is possible to, “get a fully functional Mini PCI port between the layers”(of the ICOM A2’s internal circuit boards that would allow for incorporating a wifi mod).

You can get some information of BMW ICOM A2+B+C below:
BMW ICOM A2+B+C Functions:

A2 – OBD diagnostic supporting MOST, D-CAN and K-CAN protocols

B – Diagnostic via most bus, and have connection to A-interface via USB connection.

C – 20-pin cable for old models.

BMW ICOM A2+B+C Special Features Compared with BMW ICOM:

The modified BMW ICOM A2 for vehicles with OBD access receives a significantly more powerful processor and more storage capacity. Robust aluminium case will help to avoid damage when using in harsh environments.

To protect the most connector, the BMW ICOM B for vehicles with optical most access will be equipped with a soft cover made of rubber instead of the former plastic cap.

The BMW ICOM C for old series with a diagnostics socket will be additionally equipped with an approx. 20 cm long cable, which facilitates the connection of the BMW ICOM A2 and makes storage in the engine compartment easier.

XTOOL and OBDSTAR Which one is Suitable for You?

September 30, 2019 by paulakeener  

xtool x100 pad2 or obdstar tool (x300 pro3 and obdstar DP plus). Which one has better coverage and support?
How come obdstar products are more popular and has frequent updates but xtool products are slow in updates and least popular?
Buy xtool x100 pad2 or obdstar tool?
Here are the answers:

PS: Quoted from autonumen.com.
the 1st question: Story is obdstar and xtool was a joint company for many years. They play a game chicken or the egg who came first? Obdstar start the company in 2007 and xtool in 2010. Once again who came first chicken or the egg? I’ve been working for free for 6 month now for Xtooltech.

ray-ray answers the 2nd question: If you look at old post Xtooltech had no sale in china or on eBay. I ask member here on the forum if anyone used ps80 or ps90 little to no feedback. I ask my Chinese broker to look and buy a unit for me to test. They refuse to sell to any Chinese broker. That was perfect solution I want to come out with something new with a company that was will to bring in engineers to the USA. The company was part of Obdstar that did most of their sales in commodities. After the break up they focus on heavy duty diagnostics. I went to sema last year in Las Vegas, next to sema there was diagnostics show call apex. There I meet the company and there engineers, I made a deal that day. Xtooltech learn that day that there was too much competition in diagnostics, and very little in immobilizer. I have work on making the tool better, I have not stop.
My goal is to keep developing and improving their tool (there is no money Xtooltech is paying me). Ken the owner has tried to pay me for my work and I have refuse. My mission is to make it a great tool.. what is my reward to be remember.

Xtool ps80 or ps90 or Pad2?
Xtool ps80: not sold in China.
Xtool PS90: recently starts to authorize the Chinese dealer to sell.
Xtool Pad2: The authorized Chinese dealer has stock, it is working and cheaper. The users from Brazil, Mexico, Argentina very use Xtool Pad2 and give good feedback (Read posts: Xtool Pad2 feedback and Xtool PS90 Vs PS80 Vs AutoProPad /Lite)

BMW ICOM Next Diagnostic Tool Review

September 26, 2019 by paulakeener  

Here, I’m perfectly aware what ICOM Next is and I have it.

Icom next runs a gigabyte lan port. So if router and laptop also running gigabyte ports you increase speed, that’s only if the car and software allow it.

Also the Icom next is faster for G series cars which I suspect also have gigabyte Ethernet bus.

Also it has USB3.0 instead of USB2.0 and a better wifi card.

Note that ICOM Next B is different from ICOM B. And ICOM Next A does not work with ICOM B on full speed.

For BMW G series:

Interface = ICOM

ISTA-D=Diagnostic software

ISTA-P = Coding Software

ISTA-P= Programming (Flashing) Software

BMW G series coding:

Unlike E/F series, all Diagnosis and Coding on G series cannot be done with a cheap ENET Cable or K+DCAN cable.

BMW ICOM is the only option for G series.

BMW G series programming:

For Programming (Flashing ECU’s with new Firmware), then you must have ISTA/P for G-Series cars

Note that for F-Series Programming, you will need an ENET Cable, but for E/G-Series Programming, you can use an ICOM emulator.

XTOOL and OBDSTAR Which one is Suitable for You?

September 24, 2019 by paulakeener  

xtool x100 pad2 or obdstar tool (x300 pro3 and obdstar DP plus). Which one has better coverage and support?
How come obdstar products are more popular and has frequent updates but xtool products are slow in updates and least popular?
Buy xtool x100 pad2 or obdstar tool?
Here are the answers:

PS: Quoted from autonumen.com.
the 1st question: Story is obdstar and xtool was a joint company for many years. They play a game chicken or the egg who came first? Obdstar start the company in 2007 and xtool in 2010. Once again who came first chicken or the egg? I’ve been working for free for 6 month now for Xtooltech.

ray-ray answers the 2nd question: If you look at old post Xtooltech had no sale in china or on eBay. I ask member here on the forum if anyone used ps80 or ps90 little to no feedback. I ask my Chinese broker to look and buy a unit for me to test. They refuse to sell to any Chinese broker. That was perfect solution I want to come out with something new with a company that was will to bring in engineers to the USA. The company was part of Obdstar that did most of their sales in commodities. After the break up they focus on heavy duty diagnostics. I went to sema last year in Las Vegas, next to sema there was diagnostics show call apex. There I meet the company and there engineers, I made a deal that day. Xtooltech learn that day that there was too much competition in diagnostics, and very little in immobilizer. I have work on making the tool better, I have not stop.
My goal is to keep developing and improving their tool (there is no money Xtooltech is paying me). Ken the owner has tried to pay me for my work and I have refuse. My mission is to make it a great tool.. what is my reward to be remember.

Xtool ps80 or ps90 or Pad2?
Xtool ps80: not sold in China.
Xtool PS90: recently starts to authorize the Chinese dealer to sell.
Xtool Pad2: The authorized Chinese dealer has stock, it is working and cheaper. The users from Brazil, Mexico, Argentina very use Xtool Pad2 and give good feedback (Read posts: Xtool Pad2 feedback and Xtool PS90 Vs PS80 Vs AutoProPad /Lite)

How to Using BMW ICOM A2+b+c to program BMW F-Series chassis models

September 18, 2019 by paulakeener  

Using BMW ICOM A2+b+c to program BMW F-Series chassis models

* Programming Control Unit

* Set Code Control unit

Control unit measures can be selected as follows:

* Click on the control unit under the tab “Control Unit Tree”

* Under the “TAB Edit Control unit”, either by direct selection or by clicking on the control unit.

Menu “Programming”

To execute the vehicle programming/setting code, do the following:

* Use ista/p to read vehicle data.

After you create a new dialog, display the tips for “dialog preparation”

* Follow the tips, record when necessary, confirm button “OK”

Show the dialog box “whether the control unit has been replaced”

* Confirm button “No”, exceptions see “replace (update) control unit”

Establish a connection with the vehicle:

The vehicle details are displayed after the specified associated environment has been successfully identified. Displayed under Menu “Programming”.

1 Menu “Programming”

2 Integration Level (actual), showing the vehicle’s current integration level

3 Open code status, used in vehicles or necessary opening code status

4 progress bar, showing the process of determining the action plan

5 final processing, showing ProgMan or ista/p version, through which the vehicle is finally processed.

6 Integration Level (factory), showing the integration level of vehicle production

7 Tab “Vehicle Details”

XTOOL X100 Pad2 Read Peugeot 206 BSI Pin Code Test Report

September 17, 2019 by paulakeener  

This post will share you with the process on how XTOOL X100 Pad2 Pro read Peugeot 206 BSI pin code.
Use Tools:
Xtool X100 Pad2
Xtool EEPROM adapter

Connect X100 Pad2, eeprom adapter and bsi 95160 CPU chip

2.1
2.2

Select Read Pin Code
2.3
Select EEPROM adapter
2.4

Make sure the eeprom adapter is connected and powered on, the status indicator turns on
2.5
select car brand: Peugeot->206->BSI 95160
2.6
2.7
2.8
select V1 or V2

If have communication failed error, select another option or try again
2.9

Save data
2.10

Successfully read Peugeot 206 BSI pin code by XTOOL X100 Pad2!
2.11

2013 New available ICOM A2 Diagnostic & Programming For BMW ICOM A2+B+C

September 12, 2019 by paulakeener  

AUTONUMEN.COM offer best price New ICOM A2 Diagnostic & Programming For BMW ICOM A2+B+C.

bmw icom A2 is the new update version of old version BMW ICOM. ICOM A2+B+C is second generation diagnostic interface for BMW ISTA system. BMW ICOM A2+B+C support BMW cars till 2013 year. Support BMW & MINI full system diagnose and offline programming.

What is BMW ICOM A2 ?
The modified BMW ICOM A2 for vehicles with OBD access receives a significantly more powerful processor and more storage capacity.Robust aluminium case will help to avoid damage when using in harsh environments.

What is BMW ICOM B ?
To protect the MOST connector, the BMW ICOM B for vehicles with optical MOST access will be equipped with a soft cover made of rubber instead of the former plastic cap.

What is BMW ICOM C ?
The BMW ICOM C for old series with a diagnostics socket will be additionally equipped with an approx. 20 cm long cable, which facilitates the connection of the BMW ICOM A2 and makes storage in the engine compartment easier.

AUTONUMEN provide both hardware and software for BMW ICOM A2+B+C .If you are looking for BMW professional diagnostic tools,please no hesitate to contact our sales.