LeapZipBlog: yujiacheng

yujiacheng's blog

2 blogs

Several accessories of LED lights, what state will be broken?

November 8, 2018 by yujiacheng  



1.LED light bar:


The combination of the illuminating lamp bead has a long strip, a round shape, a ring shape, a fan shape, a soft body, etc.; there are cool colors, warm colors, neutral colors, red colors, blue colors, orange colors, and the like.


2.constant current drive:


Provide a constant current to the light bar.


Various power, current, and function drivers.


3.segment switch:


Used for light bar grouping, segmentation control, adjusting the brightness and lighting effect of the combination of lamps.

Remote control switch.


How to check the quality of the accessory:


1. Judging the light bar:


The possibility that all the light bars are damaged at the same time is very small, so if some light beads are not bright, or flashing, darkening, or a light bar is not bright, and the others are normal, it can be basically determined that the light bar is broken.


2. Determine the constant current driver:


All, a plurality of or a group of light bars are not bright, blinking, or darkened, and it is basically determined that the corresponding driver of the light bar is broken.


3.judge the segmentation switch:


When the switch or remote control is used to turn on the light or perform segmentation control, the whole luminaire does not illuminate, or a certain group of illuminators does not illuminate, and when the illuminator is off, it is basically determined that the segmentation switch is broken.


For lamps with multiple drivers + segment switches, it is judged that the drive and the segment switch are damaged, and the damage should be determined by comprehensive judgment.


LED Lighting Manufacturer : http://www.lampshining.com

What effect does the power supply have on the LED?

November 7, 2018 by yujiacheng  

Green and healthy life has become the main trend of everyone's pursuit. In many fields, we are showing outstanding green and healthy life, and we will provide you with a green lighting environment in a wider field, so for everyone's lighting project. There will be more hope for development. Rejecting light pollution is the first thing to consider when going lighting!


LED lighting specifically refers to the lighting source and its supporting electrical components and technology, not only to meet the requirements of energy saving, but also to meet the requirements of harmless to human health, does not affect the ecological environment, and does not waste resources, so the lighting project is under construction. In the process, energy conservation and safety are placed in the main position to provide you with quality-assured LED floodlighting lighting tools to provide you with a green lighting environment.

UFO LED high bay light angle.jpg

Among the supporting electrical appliances that affect LED lighting, the most important thing is the power supply. The power supply has a very large influence on the luminaire. The power supply is divided into isolated power supply and non-isolated power supply. What is the difference, what is the difference in LED lights?


The difference between isolation and non-isolation is mainly that the isolation regulator input circuit and the output circuit are not common, and the non-isolated is common ground. In general, non-isolated induct or winding have primary and secondary sides, while isolated only has a single induct or. Use the isolated type when the high power and ground line interference protection requirements are relatively high, and use the non-isolated type in the case of relatively simple and relatively tight volume requirements.


If the linear power supply is a linear adjustment output module (LDO), then the linear module must be non-isolated, so whether the power supply chip is an isolation regulator has nothing to do with the linear power supply and the switching power supply. Both isolated and non-isolated are two large categories of switching power supplies.


The isolated power supply uses a transformer to reduce the voltage to a lower voltage through a transformer and then rectify it into a DC output for power supply. Because the main coil of the transformer is subjected to 220V voltage, the secondary coil only bears the low AC voltage of the output, and the primary and secondary coils are not directly connected, so it is called an isolated power supply.

ufo led high bay light powei supply.jpg

First, isolated power


1: The advantage of isolated power supply is: it will not pose a threat to the human body, and the wide voltage is very good.


2: Isolated drive is safe but less efficient.


3: As far as the circuit structure is concerned, the current isolated type scheme is mostly a fly back circuit scheme of AC/DC, so the relative circuit is complicated and the cost is high.


Second, non-isolated power supply


1: Non-isolated is now very mature, the voltage range is slightly worse than the isolation, the voltage range is between 110V-300V, and the isolated power supply can achieve 60-300V


2: Non-isolated drive efficiency is high, and the isolated or non-isolated drive should be selected according to the requirements of actual use.


3: Non-isolated type is basically DC/DC boost (Boost) or buck (Buck) circuit, the relative circuit is relatively simple, so the cost is relatively low.


It seems that in different occasions, the lamps used are not the same as the power supply. It is most important to choose the right ones, and good lamps and power supplies are inseparable from good manufacturers. UFO led high bay lights has different power. There is a choice of isolated and non-isolated power supplies to choose from, which is a good choice for those who want to choose a better LED fixture